Can you see a diagram of how the wires hook to the starter cylinoid on the firewall of a 95 b-2300?

Assuming you are talking about a 1995 Mazda B2300, a red wire from the battery goes to the solenoid on the starter, then a red wire goes from the solenoid to the starter relay which is normally located between the battery and the power distribution box in the engine compartment. A red/light blue wire from the relay connects to the transaxle range (TR) switch (if it's an automatic transm)and a pink wire connects from the TR switch to the starter clutch pedal position jumper/switch (SCPP). From the SCPP, a white/pink or red/light blue wire connects to the starter interrupt relay. From there, the red/light blue wire connects to your ignition switch. Hope this helps. At any rate, I recommend that you purchase a Haynes repair manual for your particular model. I always purchase one for every vehicle I ever buy.