How do you change your blinker?

blinker location. There will be a socket for the light to go in.

2

Remove the bulb by pressing down on it slightly, and turning counter-clockwise until it comes loose from the housing. This is the part that is apt to be problematic, especially if the bulb has "burned" itself into the socket or otherwise melted something, causing it to hold fast. Should this happen, disconnect the battery, and break the glass on the bulb. Then, with needle-nose pliers, turn the bottom housing of the bulb counter-clockwise until it comes loose.

3

Install the new blinker bulb in the reverse order of removal, and replace the blinker lens, if applicable. Check blinker to ensure it works.

You Will Need a Screw Driver.