Oldest TVs
- had glass tubes inside with wires in them that lit up like light bulb filaments; each tube was expensive to replace
- had rolled copper
- had a large picture tube
- outer case matched the shape of the picture tube; no TV was flat at the back
- needed 3 feet from wall
- had small viewing screen
- needed "rabbit ears" for an antenna that had a wire screwed to the back of the TV to ground it
- needed a large antenna on the roof
- needed a lightning rod in the ground beside the house
- Were only in Black and White until the mid 1960s.
- No remote control
- Needed to turn knobs to adjust vertical and horizontal hold; coloring; etc.
- TV picture tubes got very hot and could explode; needed disposed of properly
Newer TVs have electronic components and have progressed to "flat screen TVs" with flat backs that can be hung on the wall.
ReportLike(0)ShareFavorite