How do you reset a nuset 3 digit combination lock?

Opening Instructions:

I. Slide the lever (located above the dials on the front of the lid) down to open the lid.

II. Lift the lid from the security lock box to place or remove the keys inside the vault.

Resetting Combination Instructions:

1. Your NuSet Security Lock Box is factory preset to 0-0-0.

2. Open lid using the "Opening Instructions" Step I & II from above.

3. Lift the lid from the security lock box.

4. Make certain the lever remains up in the closed position with the last combination set.

5. Insert the "Reset Key" (included) all the way into the side of the lid and make a 1/4 turn.

6. Once the key has been turned, roll the dials one at a time until the desired combination is aligned.

Tip : Write down the new combination to prevent loss of the new combination.

7. After the new combination resetted, return the key to upward position and remove it from the lid.

8. Very Important! Check combination before placing the lid to the lock box body. Return the lever to closed/up position. If the lock retracts, the combination has been successfully changed.

Please visit NusetLock.com or call toll-free 800-60-NUSET for details.