How do you install wax seal for toilet?

1. First loose the bolts that connect it to the flange on the floor and place the toilet in the bathtub

2.Turn off the water supply

3. Remove the lid of the toilet tank and flush the toilet

4. Use a plastic cup & dry sponge to scoop out water and dry up water drop.

5. Disconnect the water supply tube by turning the compression nut on the water supply valve.

6. use a flat head screwdriver to pry the caps from the washers at the base of the toilet.

7. Remove the nuts by using a wrench from the bolts.

8.Place the nuts, washers, and caps properly.

9. Hold the toilet under the bowl and rock it gently back and forth to break the old wax seal.

10. Lift the toilet off of the floor and set it down on a blanket, a piece of cardboard or in the bathtub. For more information visit mytoiletspares.co.uk