under the scuttle which is the plastic trim at the bottom of the windscreen where the wiper arms are , Take the trim off on the right hand side (drivers side English vehicle) you can now see the heater blower motor box ,the resistor fits to this box and will probably be mounted round the back of it where you cannot see, it should have a 7 or 8mm headed screw holding it in place, don't forget to disconnect the wiring to the resistor you release it by sliding plastic retainer sideways which then releases the wiring plug, then disconnect wiring from resistor to the motor.
You may watch the following videos to see how it is a simple job. Just copy and paste the link into your web browser.
Removing the Heater Fan Motor Assembly:
www.YouTube.com/watch?v=PgZE0eM65iY
Heater Fan Motor Disassembly:
www.YouTube.com/watch?v=krbIlqbXQbo
Copyright © 2026 eLLeNow.com All Rights Reserved.
