1)remove the two Phillips screws on the bottom of the panel. (look up from the floor to see them)
2)lift the panel out from the bottom first and then the top slides slightly down and out.
3)unplug all connections (3 if i remember correctly).
4)unscrew the 4 screws holding in the switch on the back.
5)unscrew the tiny screw in the hole on the bottom of the turn knob.
note: there is a white plastic piece on the side of the switch which can fall off. Mine did, and it took me awhile to find out where it went. Just note where it goes in case you knock it off.
Copyright © 2026 eLLeNow.com All Rights Reserved.