depends if A/T or M/T tranny
ill pretend A/T
drain coolant at rad bottom drain.
remove all hoses from rad (radiator) up to 5 (2 less for M/T)
remove the 2 hoses on bottom for A/T tranny oil cooler.
remove the top bolts from rad shell and P/S tank braked,
remove all 4 screws from fan shell (shroud) and lift and tie it back towards motor
so it dont hit RAD
lift the rad ,straight up. not hitting air conditioner , mount screws close by.
to put back , reverse this and put in fresh 50% antifreeze coolant
burp it and cap it.
test for leaks.
Copyright © 2026 eLLeNow.com All Rights Reserved.