How do you remove the front interior passenger side door panel of a 2002 Dodge Ram SLT 4x4?

start by pulling the door panel out at the bottom - no screws here. it will pop but that's ok - keep pulling out the panel around the sides until you get about half way up. then pull out the electrical switchplate - also no screws - and unplug both sides. next unscrew the door opener handle (one screw). now pull out the handle that is used for pulling the door closed. this will expose two more screws that need to be removed. the hard part is this - push the unscrewed door opener handle through the slot it sits in. the last step is to push in on the center of the plastic circles on the top left and right. the panel should now almost fall off.