Change front headlight on suzuki baleno?

The headlight is fastened by three bolts.

The top one is obvious and is on top of the slam panel.

The other two are behind the bumper, under the headlight.

To get at them you have to partially remove the bumper cover.

Remove the plastic plugs holding the front part of the wheel arch cover.

Undo three cross head screws securing the cover to the bumper underneath.

Remove three 10mm bolts holding the bottom of the bumper cover.

Remove two bolts at the top of the radiator grille.

There may be a plastic rivet in the centre of the radiator grille to the bumper iron.

Reach up inside the wheel arch , pushing the cover aside and remove a self tapping screw securing the top of the bumper cover to the wing.

You should now be able to free the bumper plastic and push it away from the bottom of the headlight.

There is a small gap between the bumper iron and the headlight. Using a thin extension and10mm socket reach in and remove the bolt.

The bolt at the side can be reached the same way or from the side using a ring spanner.

Once the three bolts are removed, the headlamp can be eased out and the wiring unplugged.

It may be better for access to remove the whole bumper, complete with bumper iron.