How do you change the turn signal flasher on a 1993 Plymouth Acclaim?

To the left of the fuse panel you will see the flashers, you can up snap all of the dash triOS, take the screws out and it exposes all the flashers, theres three of them right together, the emergency, signal and horn relay.

The "trio" block contains a hazard warning(short and round), a time delay relay(tall and round) and a horn relay(square). The turn signal flasher is above and behind fuse panel. It is held in place by a bracket which the flasher "pushes" into.

This also works for the 1992 Acclaim. However, I have found that the flasher is permanently mounted on a bracket which has no means of being taken down. The flasher (which may be blue in color) has a two wire connector, which pushes on from the left. Pull this connector off and you can hook another flasher on it. You can try to re-place the new flasher on the bracket, but it might be just as easy to place the flasher in an out of the way location. I don't have the biggest hands on the block, but removing the old flasher is a job for someone with very small hands.