How do you completely remove a hornet alarm?

• 1

Remove first the negative then the positive leads from your battery, using an adjustable wrench to loosen the nut clamps.

• 2

Open the fuse box door for your vehicle and, using the chart in your manual or the back of the fuse box cover, remove with a fuse holder the fuse for your Hornet car alarm.

• 3

Pull the wiring from the back of this fuse slot, and follow it to your alarm control unit, if possible.

• 4

Locate your control unit and cut all wires leading from it with your wire strippers/cutters.

• 5

Unscrew any mounting screws holding the alarm in place. Remove the unit from your vehicle.

• 6

Follow each of the wires that were cut in Step 4 to other locations in the vehicle, such as the ignition, horn, light switch or power locks, and remove the wiring from these locations, if you'd like. This is not a required step.

• 7

Replace first the positive then the negative leads to your battery. Your Hornet car alarm is removed.