How do you remove ignition switch on a Honda Accord?

I had a hard time before i figured out how to remove my old ignition cylinder to put in a new one... I did this because my old one ond day just stopped working... It just wouldn't turn... so I boutght a new cylinder (it comes with new keys) from auto zone... cost about $26.99.... n e way hope this post helps n e 1...

Honda ACCORD 92 DX

First remove the 5 screws that hold the stering column with a star point screw driver (you might need a ling screwdriver)...

Remove the casing to expose the ignition assembly

Use a flat head screwdriver to remove the outer shell of the ignition cylinder (black round thing around the turnig part)

Remove the locking screw (I just used a bird beak pliers to back it out because of the odd location " it right by the middle arrow")

Put in the key and turn it to position I.. (Turn on the ignition... don't start it...)

Use a firm tool to depress the locking pin located behind the lock screw towards the stering whele shaft...

Thought U don't see my key in the ignition U MUST HAVE THE IGNITION ON!!!

while depressing the pin hold the key firmly and pull the cylinder out (rock it a but it should come right out)

I couldn't get the new one in cause the new pin on the new cylinder wouldn't depress... (when installing the new one leave the key in the on position)...

I just used a set of pliers to pluck it out... then just used the locking screw to hold it on.... dosent really matter tho...