How do you remove your front bumper off your clio 172?

remove top torx screw in arch liner, peel back liner to expose 10mm bolt (1 each side). remove lower torx screws located on bottom edge of bumper almost in line with foglamps. underneath car you will find a plastic flap attached to crossmember, you can either drill out the rivets at the front or remove the 3 10mm bolts at the rear. last but not least remove the two torx screws (1 each side) located in gap between bumper and bonnet. unplug the fog lamp connector located behind passanger side foglamp.

pull bumper tips out and pull bumper forward and free from the vehicle.

(based on 2001 clio 172 UK model)