With the engine on top dead center. You will find two marks on the cam gear it should be even with the cylinder head surface. the next mark is on the crankshaft pulley it should be pointing to the mark on the bottom timing cover. you could remove the top timing cover before you put the engine on top dead center so you can see the cam gear. but leave the bottom cover on. Now when you take the covers off you will see another belt. that is the balance shaft belt. the marks for the balance shaft belt are on the balance shaft gear, the oil pump gear, and the crankshaft gear. I hope this will help, and good luck!!
Copyright © 2026 eLLeNow.com All Rights Reserved.