How do you remove locking hubs on a 1989 suzuki sidekick?

If your sidekick has automatic locking hubs,step 1 loosen the cover an oil filter wrench works well.2 loosen the 6 mounting screws.3 pull the hub assembly off the end of the half shaft.when installing put a new o-ring,make sure the the tab on the hub,fits into the notch on the spindle.If your hubs are manual,remove the front wheel,remove the caliper,install 2, 8mm bolts into the threaded holes,and tighten evenly.This will remove the rotor from the hub assembly,thread a bolt into the axle shaft,and pull the axle toward you,remove the snapring.then remove the hub. this is right out of the shop manual. Hope this helps.