Why is a sag provided in the transmission line?

Sag is provided in transmission lines in order to lessen the tension of the transmission lines. Sag literally means to be bend in shape. In overhead transmission lines , the difference in level between points of supports (towers or utility poles) and the lowest point on the conductor is called a sag.

Explanation: While erecting an overhead line, it is very important that the conductors are under safe tension. If the conductors are too much stressed between the supports ( towers, utility poles), then the stress on the conductors may reach to an unsafe level and the conductor may break due to excessive pressure ( i,e tension). in order to permit safe tension in the conductors, the conductors ( i.e the transmission lines) are not fully stretched but are allowed to have a dip or a sag.