Which tool is the best for cutting big metal rods?

The metal rods are more hard, so to make a cut is not easy with the hand tools. We can use the best of the above:

You may need to cut a metal rod for a host of applications, and general tools may not do the trick. The consistent method is with a metal hacksaw. Cutting a rod is a good way to learn how to work with metal. The cutting method should work with minor modifications for other metals.

>> Mark the rod

>> lock rod

>> spray some lubricant

>> start pushing and pulling your hacksaw

>> finished

Using this angle grinder is by far the best tool for cutting any kind of all-thread. It's has some easy steps to make a cut.

>> Place a mark on the rod

>> Lock rod

>> Fix the disc in the machine

>> Starts machine and make a cut

>> Finished

Using hacksaw it takes time for making the cut, but on the other hand it is an economic tool as the cost of cutting is low as compared to machined. Angle grinder can reduce your effort while making cuts. It will cut faster than hacksaw but the cost of cut is more than a hacksaw.

So, As per me for cutting big hard metal rods one should use grinder machine.

for more visit Bipico Industry