How do you change the stereo in a 96 Pontiac Sunfire?

Let's see. First, open the glove box door. You can make it drop all the way down by flexing the little plastic piece that stops it from dropping, to the side. This gives you room to work. On the left side of the glovebox face, you will see a screw or two that hold the piece of molding around the radio on. Remove those screws and pull off the molding. Once the molding is off, you'll see a screw on each side of the radio, which holds the radio bracket to the dash. Take those out, then slide the radio forward. There is a connector which needs to be carefully removed from the back of the radio. The antenna needs to be unplugged too. Then the radio will slide right out. Installation is the reverse. FriPilot