1997 JEEP TJ Wrangler overheated and motor quit running. Now it will not start. I have gas and spark. I have replaced the crank sensor and it did not help. I was getting errors 55 65 11 and 12?

There are 4 different readings for 11 12 without the generic scan tool code it will be harder to determine. For 12 battery power to pcm was disconnected. for 11code p0320 no crank reference signal detected during engine cranking.for 11 codep1391 intermittent loss of either camshaft or crankshaft position sensor. for11 codep1398 ckp [crank shaft position]sensor target Windows have too much variation. sorry my reference manual does not show 55 or 65 hope i helped Mine also it says PCMbut,I would check batt and did this get that hot to shut it off you will have to Waite a while until it cools down.