How do you remove VW cabrio injectors?

1) The injector is pulled from the insert, with main O-ring and end cap/small O-ring together

2) The end cap is removed from the injector with plyers. Replace the O-ring now, or before installing the injector)

3) Remove the "C" clip (the old, large O-ring can just be cut or pried off - mine were dried and brittle)

4) Take the new O-ring (after soaking in a little gas) and slide it over the injector until it seats in it's groove

5) Reinstall the "C" clip

6) Reinstall the end cap

7) Remove/install inserts if you want to clean them

8) Smear a little oil on the O-rings and insert the injectors