How do you remove the gauge cluster in a 1991 Acura Integra?

fist and foremost, make sure you have ample daylight to do this, i learned the hard way. first you take out the speedo cable from the transmission, and feed it through the firewall, not all the way though. then you unscrew the pannels from under the steering wheel, glove box, and take out the shifter cover. there are two screws outside of the guage cluster that you have to remove. take off the a/c and a/c temp. control and there should be 3 screws, take those out. there is a screw hidden behind a tiny panel on the bottom most right part of the black dash panel, take that screw out as well. now you should be able to remove the whole black dash panel as one whole peice. unclip all of the switches from the back of the panel and remove it from your work area. there are 4 screws holding on the guage cluster that also needs to be removed. be careful pulling out the guage cluster because there are two clips or three clips depending on model that need to be removed as well. also, be careful not to pull the speedo cable off the connector, i also learned that the hard way. now you should be able to replace the cluster and just back track these steps to put it all back together