What is the vizio television code for the cisco hda-ir2 remote control?

Easier and no codes are required; do the following:

1. Turn the TV on with your TV remote.

2. On the new remote HDA-IR2, press "Prog" and "TV" buttons at the same time until the red LED is on; release.

3. Press the "TV" button again to start the auto search and aim it towards your TV.

4. The remote will cycle through the stored codes. The TV will turn "off" when the right code is log in. You should imediately press "Prog" to stop the cycling, the code will then be saved in the new remote.

5. Press the "TV" on the new remote; your TV should turn "on". If not start over again..you were slow at pressing the "Prog" to stop the search.

5. Next program the Volume control, Press "Prog" and "TV", release, and press "Vol-" ... new remote will blink twice. This will control your black box volume. You can set the black box to near max and control the volume using the TV volume.

6. Now press "Prog" and "TV", release, and press "Vol+". You now can control the volume of your TV. If the sound is compresse or fuzzy, lower the black box volume.

kaicho8888