How do you make a 100uH inductor?

To make a 100uH inductor, you would typically start with a core material such as ferrite or powdered iron. Then, you would wind a specific number of turns of wire around the core, calculating the number of turns based on the desired inductance value (in this case, 100uH). The formula for calculating inductance is L = (N^2 * μ * A) / l, where L is inductance, N is the number of turns, μ is the permeability of the core material, A is the cross-sectional area of the core, and l is the length of the coil. After winding the wire, you would typically encapsulate the inductor in a protective casing.