How do you recover a pool table?

One inch thick should not be too heavy for two people, please be careful with the weight.

You will need:

Needle nose pliers for taking out staple from the cloth.

Socket wrench for the bolts.

Screwdrivers

Hammer possibly

Razor blades (flat)

Dust mask

Garbage bags

Wrench

Allen Wrench for the pocket

These are generic and what I can remember when I was taking apart 10 foot snooker tables and 9 foot pool tables from Brunswick.

Take out the pockets first

then

You will need to start with the rails. Take them off by removing the bolts from underneath the table. They should be spaced out between the pockets

Remove the cloth by pulling out the staples.

When the cloth is off you will need to break the seams that hold the slate pieces together. use the razor blade to clear whatever was used to keep it together. The slate should be held down by bolts. You will need to remove them to take the slate apart.

Good Luck..

You may need modified instructions depending on your table.