How do you change oil in Suzuki c90?

On my 2006 C90T, here's what I do:

1. Stand the bike up straight, and make sure it can't fall over.

2. Put a pan under it.

3. Pull the drain plug.

4. Remove the cover from the RH side of the engine.

5. Remove the oil fill plug.

6. Let the oil drain out.

7. Remove the oil filter.

8. Clean the spilled oil off of the frame.

9. Replace the oil filter.

10. Remove the pan with the old oil in it.

11. Replace the oil plug, using a new washer.

12. Add oil, until it shows half way on the sight glass.

13. Start the engine, let it idle about 5 minutes.

14. Recheck the oil level, and add some if needed.

15. Replace the engine side cover.

16. Remove the bike stand.

17. Dispose of the used oil properly.

18. Go ride.