What can you do to solve a problem which has turned out to be water sucked into your motor from a cold air intake.?

Remove the drain plug and oil filter. With the drain plug off, pour 2 quarts of kerosene in the oil fill. Let sit for one hour. Reinstall drain plug, fill with oil, and install new filter. Remove all spark plugs and disconnect the coil wire. Pour one tablespoon of oil into each cylinder. Turn the engine over for 45 seconds in intervals of 15 seconds each. Install a new set of plugs, reconnect the coil wire. Charge the battery. Spray a small amount of starter fluid in the air intake. Start the engine. Drive the car for at least 10 miles. Change the oil and filter one more time. You should then be good to go.