How do you reset the service indicator on a 2004 touran?

Switch off the ignition and hold IN the reset stalk under the speedo

Switch on the ignition the release the stalk.

Then TURN the stalk from under the taco clockwise and hold in position. Horizontal dashes should appear in the odometer.

Finally switch off the ignition whilst holding the taco stalk in the clockwise position.

The system has now been reset. When you switch on the ignition the service message should be cleared. Not a job for a one armed person ! Let us know if this works as I have never used this method.

The first method I understand will work with or reset the CAN-BUS to the "fixed servicing interval" mode ?on the release the stalk.

Then TURN the stalk from under the taco clockwise and hold in position. Horizontal dashes should appear in the odometer.

Finally switch off the ignition whilst holding the taco stalk in the clockwise position.

The system has now been reset. When you switch on the ignition the service message should be cleared.