How do you reset the oil change light for 2003 Saturn L200?

From Owners Manual:

How to Reset the Oil Life System

The GM Oil Life System calculates when to change your

engine oil and filter based on vehicle use. Anytime your

oil is changed, reset the system so it can calculate when

the next oil change is required. If a situation occurs where

you change your oil prior to a Change Engine Oil light

being turned on, reset the system.

After changing the engine oil, reset the system by

performing the following steps:

1. Turn the ignition key to RUN with the engine off.

2. Fully press and release the accelerator pedal three

times within five seconds.

If the Change Engine Oil light is flashing, the

system is reset. The light will flash for up to

30 seconds or until the ignition is turned off.

If the light comes on again and stays on for 30 seconds

at the next ignition cycle, it did not reset. You will

need to reset the system again.