How do you re fill a bobbin on the singer 6267 sewing machine?

First of all make sure that you have the correct bobbin for the 6267 machine. There are quite a few and not all of them will fill with this machine.

Open the slide plate underneath the needle and insert the bobbin.

PARTIALLY close the slide plate. The marks on the slide plate and machine bed must be lined up for the bobbin winder to work.

Bring thread from needle under the presser foot. Wind the thread one turn in any direction around the presser foot screw.

Press the "One Step Buttonhole A" button on the control panel.

Begin running the machine

Watch through the slide plate until the amount needed is reached on the bobbin.

Stop the machine , remove the thread from the presser foot screw.. Close the slide plate completely.