Precautions when working with a shaping machine?

PRE-OPERATIONAL SAFETY CHECKS1. Ensure no slip/trip hazards are present in workspaces and walkways.

2. Check that machine guards are in position.

3. Do not leave equipment on top of the machine.

4. Ensure cutter is in good condition and securely mounted.

5. Locate and ensure you are familiar with the operation of the ON/OFF starter and E-Stop (if fitted).

6. Faulty equipment must not be used. Immediately report suspect machinery.

1. Keep clear of moving machine parts.

2. Never leave the machine running unattended.

3. Do not leave equipment on top of the machine.

4. Follow correct clamping procedures- keep overhangs as small as possible and check work piece is secure.

5. Ensure you have selected correct speed and rate.

6. Ensure you have set the correct depth of cut.

7. Before making adjustments and measurements or before cleaning swarf accumulations switch off and bring the machine to a complete standstill.

1. Switch off the machine.

Leave the machine and work area in a safe, clean and tidy state