How do you replace the front turn signal bulb on a 1998 Buick Century?

1. Open hood and locate the light assembly (left or right). On bothsides of the assembly you have a white piece of plastic that slides up and the whole unit comes loose. Make note where the light assembly connects to the car before removing the assembly. 2. Unplug the wire harness so the entire unit can be removed. 3. On the back of the light assembly, remove the round rubber piece for the bulb you want to replace to expose the light socket. 4. Turn the socket counterclockwise (about 90 degrees turn) and pull the entire bulb socket out. 5. Remove the old bulb from the socket by grasping near the base and pulling. 6. Insert the new bulb (in the same direction as the old one). 7. Reinsert the socket into the assembly by aligning the tabs on the socket with the holes in assembly and turn clockwise (about 90 degrees) to relock the socket in place. Then replace the round rubber piece. 8. Reconnect the wire harness and reinstall the white pieces of plastic to hold the assembly in place. Good luck. Should take about 5 minutes to do this.