How do you bleed the brakes on a 1997 dodge diesel?

It takes two people. # Suck the brake fluid out of the reservoir and replace with new fluid. # There is a bleed screw on each wheel, it looks like a grease zirk. Loosen the bleed screw and have someone push the break peddle and hold it. # Tighten the screw then they can release the breaks. # Repeat step 2-3 until the brake fluid is clean # Repeat on each wheel, refilling the break reservoir after each wheel. Do not get air in the lines either by sucking the reservoir dry or by releasing the breaks when the bleed screw is loose.