How do you bleed a clutch on a vivario van?

You need to find the slave cylinder (located on transmission) and have someone hold the pedal down then open valve and close when fluid stops coming out then they can release the pedal and repeat, hold pedal down (and dont move) open bleeder valve and close when fluid stops coming out, keep repeating and make sure the clutch fluid reserve does not go dry because you do not want air in system. Keep doing this until no more air comes out or you see new fluid (depending on what your trying to do). If you are trying to get clutch pedal stiffer and bleeding it does not work you may need to replace master and/or slave cylinders.