Mention the parts available in basic cellular system?

The architecture of most cellular systems can be broken down into the following six components: a) Mobile Station (MS): A mobile station is basically a mobile or wireless device that contains a control unit, a transceiver and an antenna system for data and voice transmission. For example, in GSM networks, the mobile station will consist of the mobile equipment (ME) and the SIM card. b) Air Interface Standard: There are three main air interface protocols or standards: frequency division multiple access (FDMA), time division multiple access (TDMA) and code division multiple access (CDMA). These standards are basically the medium access control (MAC) protocols that define the rules for entities to access the communication medium. These air interface standards allow many mobile user to share simultaneously the finite amount of radio channels. c) Base Station (BS): A base station is a fixed station in a mobile cellular system used for radio communications with mobile units. They consist of radio channels and transmitter and receiver antenna mounted on a tower. d) Gateway: The gateway is the communication links between two wireless systems or between wireless and wired systems. There are two logical components inside the Gateway: mobile switching center (MSC) and interworking function (IWF). The MSC connects the cellular base stations and the mobile stations to the public switched telephone network (PSTN) or other MSC. It contains the EIR database. The IWF connects the cellular base stations and the mobile stations to internet and perform protocol translation if needed. e) Databases: Another integral component of a cellular system is the databases. There are two main databases: the Home Location Register (HLR) and Visitor Location Register (VLR). The HLR contains the information of each subscriber who resides in the same city as the mobile switching center (MSC). The VLR temporarily stores the information for each visiting subscriber in the coverage area of a MSC. The VLR is the database that supports roaming capability. f) Security Mechanism: The security mechanism is to confirm that a particular subscriber is allowed to access the network and also to authenticate the billing. There are two databases used for security mechanism: Equipment Identify Register (EIR) and Authentication Center (AuC). The EIR identifies stolen or fraudulently altered phones that transmit identity data that does not match with information contained in either the HLR or VLR. The AuC, on the other hand, manages the actual encryption and verification of each subscriber.