How do you remove blower motor 1996 jimmy?

Take off the negative terminal and tape it up so it will not reconnect by mistake. Then remove the 3 bolts holding down the computer. Pull all 5 plugs off the computer they are color coded so you cant mix them up. Take the plastic tank out by removing the 3 bolts out that hold it down ans just put it aside. Remove the 5 screws that hold the fan down. Do the bottom one first its harder to reach but if you lay flat on the motor you can see it. If you take the easy ones first this is very hard to do but if you do the hard one first its easy to keep the socket on it. Then take the others out and pull the plug and take off the hose that feeds air to it (the Fan). Remove the motor. WARNING before you try this change the resistor set first its easier to reach and its cheaper. I did this job only to find it was the resister and not the blower. Reverse this procedure to put it back in. Good luck. Took me 2 hrs to do it.