How do you change bulb on digital clock in Peugeot 206?

This answers is accredited with thanks to golfguy at http://www.206info.co.uk/ForumsPro/viewtopic/t=19256/highlight=clock+bulbs+chang%2A.html

dead easy!

1/ Push backwards on the cover over your clock - this will pop out towards the windscreen.

2/ You will now be able to see your clock. look for a Trox screw in front of the clock - remove this and you will be able to lift the clock unit out (can be done with a normal flat head screwdriver).

3/ Disconnect the wiring on the back.

4/ Twist the bulb on the back of the clock unit 90 degrees, and the bulb will pop out.

5/ The bulbs are roughly a quid in your local motabitz or wherever, pull the old one out of the casing and put the new one in.

6/ Repeat as necessary and reassemble.

Done!

Also...

The cover comes up and out complete with the hazard warning button. No need to disconnect this.

The clock unit takes 3 bulbs.

They are a push fit into the white bayonet plastic bolder and old ones can difficult to remove.

Make sure new bulbs have wires making contact with holder.

You will need to reset the clock unit language and date/time when you reconnect it.

Good luck!