How do you change an Audi a6 emergency flasher switch?

just changed one yesterday, real easy.

1 remove the fascia plate the surrounds the switch in the central dash - prise a flat blade screwdriver under the plate and ease off. you meed to pull gently upwards to release.

2. when fascia has been removed- the cup holder should be removed also. Slip a fine flat blade horizontally into each corner of the cup holder and it will spring out there's a connector at the back of the cup holder just remove that also

3. Slide a screwdriver down the left side of the flasher switch. Look and see there is a spring clip attached to the side of the switch. That holds the flasher unit insitu, push the clip intowards the switch and pull gently. Repeat the same clip release thechnique on the flasher switch right hand side.

4. release the connector on the faulty switch and replace the

switch.

For a novice this procedure will take 10 minutes