How do you replace the air filter in a 2006 Toyota Solara?

1. Open the hood

2. Peer into the darkness at the front of the engine compartment on the drivers side. You'll notice a fairly large black box with a large black tube (the air intake) between it and the throttle body.

3. At your option, remove that tube (takes more time but makes the rest of the job simpler) or just loosen the clamp nearest the box.

4. The big black box has two, 10 mm bolts on one end (nearest the fender). Unscrew those bolts.

5. Unplug the Mass Airflow Sensor (connector on top of the tube at the box end)

6. Lift the box lid from the side the bolts were loosened and flip it over so it's resting on the engine if you didn't remove the intake tube. Just set it aside if you did.

7. Remove the original filter and check inside the box for heavy collections of dirt, critter nests or anything that might contaminate your brand new filter. Wipe them out.

8. Put new filter where you removed the old one and reverse the process to re-assemble the airbox.

By the way, if it's time to replace the engine air filter, it's also time to replace the cabin filter. You'll find that behind the glove box door. Just remove the door, pull out the tray containing the filter, remove the old one, put in a new one and re-assemble the door.

Cheers