How do you set tappet b6 ford bantam 94 model?

To set the tappets on a 1994 Ford Bantam with a B6 engine, first ensure the engine is cold. Remove the valve cover and use a feeler gauge to measure the clearance between the rocker arm and the valve stem. For the B6 engine, the typical clearance is usually around 0.25 mm (0.010 inches) for both intake and exhaust valves. Adjust the tappet clearance by loosening the lock nut and turning the adjusting screw until the desired clearance is achieved, then re-tighten the lock nut and recheck the clearance.