How hard is it to change all the light blubs in the dash for a 97 Toyota Camry Toyota ran test said all the blubs are no good But they want way to much to fix?

It is very hard to believe that all the light bulbs went bad at the same time. That is almost impossible. I would suspect you have another problem, such as a blown fuse. What test did you run? The only way to test a bulb would be to remove it and check the continuity. auto zone is good at telling you want bulbs you need and how to change If it is your bulbs, I have changed mine many a time. Take a flat head screwdriver any pry off the modling around the gayges. Should pop out. This is of course only after u take out the 2 screws invisble to u unless you look under the lip, right above the gauges. once this is done it will let u pull the cluster out. There should still be the plastic cluster holding on, take a screwdriver and realease all of the clips, pull it out carefullythe mileage reset gauge CAN break off :). dont unplug just pull it out and turn upside down.... lights are underneath

ok i agree with the last comment the gauges are a removable panel remove the whole panel and they are underneath just a turn/twist screw holds the bulbs in place.

== ==