How do you program a keyless entry for a 1995 Chevy 1500?

I just did programmed my key-less entry this morning after looking for about 5 hours.

OK so first locate your computer hookup under the dash, it should have 2 rows of 6 plugs.

Grab a piece of wire and put one end in the very bottom left hole, if your looking at it from the front of the seat. ground the other end of the wire to the truck. Your truck should lock and unlock meaning it is in programming mode. leave the wire in the plug and make sure it is still grounded, hold it if needed.

Take your key fob and hold the unlock and lock button until the truck unlocks and locks again. take the wire out and test the key fob. Repeat this if need for another key fob.

if you need anymore information i will include the link to the website i found that on later.

Here is a link to the website that i used, this site can be used for other cars. look up your make and model.

http://www.programyourremote.com/classified/DisplayAd.asp?id=1460