What are the steps to properly apply a self-leveling floor compound for wood surfaces?

To properly apply a self-leveling floor compound on wood surfaces, follow these steps:

1. Prepare the wood surface by cleaning it thoroughly and ensuring it is free of dust and debris.
2. Prime the wood surface with a suitable primer to improve adhesion.
3. Mix the self-leveling compound according to the manufacturer's instructions.
4. Pour the compound onto the wood surface starting from the furthest corner and work towards the exit.
5. Use a trowel or a squeegee to spread the compound evenly across the surface.
6. Allow the compound to self-level and cure according to the manufacturer's recommended drying time.
7. Check for any imperfections or uneven areas and sand them down if necessary.
8. Finish the surface with a suitable sealant or topcoat for added protection and durability.