How do you Replace door threshold gasket?

To replace a door threshold gasket you have to place a pair of sawhorses outside and make sure they are set up so that the door can be laid flat on top of them. Take a screwdriver and insert it into the bottom of the pin on one of the hinges. Use your hammer to pound on the top of the screwdriver to force the hinge pin upwards and out of the hinge. Repeat this process for the rest of the hinges. It is important to keep the door closed while removing the hinge pins so that the door or floor is not damaged. Open the door slowly and pick and slide it over the side to remove it from the hinges. Set the door on the sawhorses. Inspect the threshold seal on the bottom of the door. Remove the strip by removing the screws on the bottom of the door and sliding the threshold seal out of the channel that holds it. Slide the new threshold seal into the channel and re-insert the screws to lock it into position. Remove the door from the sawhorses and take it back into the house. Set the door back onto the hinges, inserting it in the closed position. Re-insert the door hinge pins using a hammer to pound them all the way back into place. Open and close the door to see how the seal affects the operation of the door.