How do you reset oil warning light on BMW 330i 2006?

1. First turn the ignition off

2. Press and hold the trip odometer button WHILE turning the key to position 1

3. Keep the button depressed about 5 seconds until you see "oil service" or "inspection" with "reset" or "re" in the display then let go

4. Press the button again and hold for approximately 5 seconds until "reset" or "re" flashes

5. While the display is flashing, briefly press the button again to reset the service interval. After the display has shown the new interval you should see "END SIA" for about 2 seconds

*Note that if the "Reset" or "Re" does not flash, then you have not met the minimum consumption even and cannotreset

This procedure has been tested on the E46 3 Series

Hope I helped :)